Uses Protection against corrosion of pipes and pipelines, joints, specials and all metallic structures conveying fluids at ambient temperature, above ground, embedded, in screed, buried or underwater. Compatible with all factory coatings. Approval JITWRAP 100/12 is certified according to EN standard 12068-B 30°C – DVGW approval NV-5180BM0535. Composition JITWRAP and JITRASTRIP are polyethylene backed tapes with a highly adhesive compound. Characteristics Colour Weight (Kg/m²) Thickness (mm) Thickness of the film (µm) Application temperature (°C) Service temperature (°C) Application Prepare surfaces by removing all loose scale, rust or other foreign matter by wire brush. Surface must be clean, dry and free of grease. Apply a thin film of JITRA K primer to all metallic surfaces to be protected and allow to dry (tacky but not wet). Primer is not compulsory if the surface can be sandblasted to SA 2.5 of JITWRAP 100/12 noir 1,3 1,0 150 +10 to+40 -30 to +65 JITWRAP 100/12 HT Gris/noir 1.3 1.0 UV resistant 100 +10 to+40 -30 to +75 JITRASTRIP noir 1,3 / 2,0 1,0 / 1,5 8 +10 to+40 -30 to +65 ISO 8501-1 with a profile of 40 to 75 µm according to NACE Standard RP-0287-91. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Packaging (thickness 1 mm) 10 m long rolls – standard widths : 50 mm and 100 mm – other dimensions on request Box dimensions : 420 x 280 x 102 mm Standard box of 6 m² - dimensions 468 x 312 x105 mm- weight 8 kg. Euro-pallets 1,20 x 0,80m largeurs rouleaux/ carton 50 mm 12 100 mm 6 m²/carton PB/carton (kg) 6 6 8 8 Transportation code : Not classified Custom tariff : 3919.1061 At all times we reserve the right to change the composition and characteristics of our products, in order to adapt them even more to the economic and technical user requirements. PL 030318 LD rev0703 PhL0807 0909 Cartons/ palette 65 65 Rouleaux/ palette 780 390 390 390 m²/palette PB/palette (kg) 540 540 Volume/ palette (m³) 1,75 1,75
JITRANYL Composition Plasticized PVC film coated on one side with a rubber resin pressure sensitive adhesive. Approval JITRANYL (2 layers) is approved as a mechanical protection according to EN 12068 standard (DVGW reg. N° NV-5180BM0485). Packaging Rolls of 20 m length - standard widths: 50 mm and 100 mm – other widths upon request. Each roll is individually packed with an identification label. Box dimensions: 330 mm x 260 mm x 220 mm. Width (mm) 50 100 VIPE Composition Flexible PE film coated on one side with a rubber resin adhesive. Approval VIPE has been granted a GAZ DE FRANCE approval. JITRA 71B Composition Strong PE film coated on one side with a rubber resin adhesive. Approval JITRA 71B (2 layers) is approved as a mechanical protection according to EN 12068 standard (DVGW reg. N° NV-5180BM0485). Packaging Length (m) 30 30 Width (mm) 50 100 ROCKSHIELD Please contact us. At all times we reserve the right to change the composition and characteristics of our products, in order to adapt them even more to the economic and technical user requirements. JT 12/2016 Rolls per box 24 12 m² per box 36 36 Boxes per pallet 27 27 Rolls per pallet 648 324 m² per pallet 972 972 Rolls per box 48 24 m² per box 48 48 GW per box (kg) 12 12 Boxes per pallet 60 60 Rolls per pallet 2880 1440 m² per pallet 2880 2880 GW per pallet (kg) 740 740 volume per pallet (m³) 1,55 1,55
1 Online Touch